Slim Pen Refill Guide
Refill Guide: Slim Bolt Action Pens
You went slim for the everyday carry profile. The thinner barrel takes the same precision refill as our standard pens.
This page covers exactly what fits the Slim Bolt Action Pens by Bastion® (Slim Aluminum, Slim Stainless Steel, Slim Carbon Fiber, Slim Titanium), what doesn't, and how to swap the cartridge in under a minute.
The short answer
Every Bastion Slim Bolt Action Pen takes a classic Parker-style G2 refill, sometimes called an "ISO G2" or "International G2" cartridge. The official spec is roughly 98mm long, 6mm wide, with a tapered front end and a 0.55mm fine tip. Same refill, every slim model.
Bastion's own replacement cartridges are made to that exact spec, so they're the safe bet. They come in:
- Standard ballpoint, black, blue, red
- Gel ink, black, blue, red
- 0.55mm fine point
Shop Replacement Ink Cartridges
What "Parker-style G2" actually means
Parker-style G2 is an industry standard, not a single brand. Several pen makers produce cartridges to this size. The keyword is classic. Parker and a few others changed their cartridge body width sometime after 2015, and the wider versions don't always seat properly inside a precision-machined bolt action barrel. The slim profile makes that fit even more important.
If a refill is sold as a "Parker-style G2" or "ISO G2" with the tapered front end, it's almost always going to fit. If it looks like a straight tube with no taper, or it advertises a body wider than 6mm, it probably won't.
What does NOT fit
- Pilot G2. Different cartridge entirely, despite the matching name. The Pilot G2 is a Pilot-proprietary refill and won't seat in your Bastion pen.
- Wider-body Parker refills made after 2015. These can stick or fail to retract.
- Schmidt P900-style "Parker-G2" branded refills are usually fine if they're tapered, but check the dimensions before you buy a pack.
When in doubt, our team can confirm before you buy. Email or use the chat in the bottom right.
How to swap a refill (under a minute)
- Open the bolt by sliding the rear bolt forward and to the side (locked open).
- Unscrew the front tip section by rotating it counterclockwise.
- Pull out the old cartridge and the spring (set the spring aside, you'll reuse it).
- Slide the spring onto the new cartridge.
- Drop the cartridge spring-end first into the barrel.
- Screw the front tip back on, snug but not over-tightened.
- Slide the bolt back to closed. Test on paper.
If the new cartridge feels stuck, doesn't retract, or scratches the paper, the refill is the wrong size. Pull it back out and try a Bastion replacement.
What real Bastion owners say about the Slim pens
Owners consistently mention the smooth writing feel and satisfying bolt action mechanism that the slim variants share with our standard pens. The right refill is what keeps that experience consistent across every slim model.
Pen specs (for reference)
- Length: 5.25 inches
- Profile: Thinner than standard Bastion bolt action pens
- Closure: Retractable bolt action
- Materials available: Aluminum, Stainless Steel, Carbon Fiber, Titanium
- Point type: Fine (0.55mm)
- Refill standard: Classic Parker-style G2 / ISO G2
Need a fresh refill?
Bastion replacements ship from our warehouse. Standard ballpoint or gel, black/blue/red, $6.99. Free shipping over $35.
Shop Replacement Ink Cartridges | Browse Slim Pens
See pricing and reviews on Bastion's bolt action pen collection.